Understanding Broadcom teaming failover message in OME
This is a cross-post from the OME forum. I was asked to do so by one of the Dell responders.OME sent us some error messages regarding one of our server NIC teams failing over, but I cannot find any...
View ArticleOpenManage 8.2.0 snmp
I updated OpenManage Server Administrator from 8.1 to 8.2 on Centos6 and have the same issue with SNMP module. ( StorageManagement-MIB::virtualDiskDiskCachePolicy or...
View ArticleDell OpenManage JRE (Java RunTime) is EOL
We noticed that the latest version (8.1) of OMSA comes bundled with JRE (Java RunTime) 7.As per Oracle Java SE Support Roadmap, JRE 7 has end-of-life (EOL) on April 2015.Any plans to upgrade...
View ArticleT430 w/ iDRAC8 via ssh: racadm serveraction graceshutdown does nothing
Hi, we recently bought a new T430 with iDRAC8 Enterprise Management Card. Managing the server via remote console (web browser access on iDRAC IP) works perfectly. However, I would like to control the...
View ArticleOpenmanage 8.x / Broadcom SNMP Agent missing oid's (Windows 2012R2) on...
We have multiple PowerEdge R310 servers with the same problem.Systems are running Windows 2012R2With OpenManage 7.4 installed we can monitor if a network link is up (using oid...
View ArticleClik here to view.
cctk --autoon says option not available or cannot be configured through this...
When we try to run Command Configure to set the BIOS to turn on every morning at 6am it says option --autoon not available. Only on the Optiplex 740s. The 580s, 9010, 9020s all work fine.We can even...
View ArticleWhat is the racadm command to check psu redundacy iDRAC7 ?
Today I noticed one of my R620s had a Redundancy Policy in Power Supply Options of "Not Redundant"I have separate circuits going to each PSU so it seems I would want that to be "Input Power...
View ArticlePart numbers for iDRAC for Dell T420?
I have a T420 which I originally configured (not very smartly, I know) with just a BMC. I'd like to add iDRAC Enterprise, which I know also requires installing an iDRAC Express board. I am having...
View ArticleCan't ping Ftp.Dell.com
So I'm trying to update the firmware and such from within the Lifecycle Controller. I have configured the Network and it passes the Gateway IP and DNS IP but fails on the Server IP with...
View ArticleOMSA 8.2 on 2008R2 - No hardware / information displayed
I've recently uninstalled and old version of OMSA and fresh installed OMSA 8.2 (32Bit) on Windows Server 2008 R2 DC. This is on a Dell R710.When I attempt to launch OMSA and log in, I see no...
View ArticleHow do I change the serial number on an M610?
Hi,Somehow one of our M610 blades has the same serial number as another of our M610s. As a result OME gets very confused and puts both DRACs under the same server. I need to get both servers updated...
View ArticleOME Errors
When I try to launch OME - I get the following: "Missing shortcut - cannot find omelaunch.exe" When I try to launch Essentials Command Line Interface I also get "Missing short cut - cannot find...
View ArticleDSDP Set RAID envout issue
Upgraded to DSDP 3.0 (have been using it since 1.0) and have found that the raidcfg step fails because the Dell_arraybuilder.vbs that the step calls can't create the envout.txt file when it does the...
View ArticleJust want to share an amazing experience of conference calling
I recently download a conference calling application known as MeetingMogul from app store on the advise of my friend. I really found it to be amazing. I was able to attend all calls hosted on...
View ArticleOMSA - Alert Frequency
My current setup consists of OME installed on a server and OMSA installed on another physical server separate from the OME installation. Currently I can can monitor and receive alerts from the physical...
View ArticlePXE Boot into OME for Pre-provision ?
Hi, Has anyone used OME in a way to PXE boot into OME for updates ? We have a spare pool vlan which is use for server rebuilds and lifecycle transitions. I'd like to have a PXE image that boots and...
View ArticleBroadcom BACS issue "cannot connect to localhost" with Server 2008 R2, latest...
Hi,I've just tried to update a couple of our R720s. They have the Broadcom 5719 and 5720 NICs. I have them on the latest firmware (7.10.61) with the latest Broadcom driver (version 19.0) and when I try...
View Articleinstall email program
i have windows 7 and i had windows 7 on my last desktop. I never had to install an email program to send email. so why do I have to do it on this windows 7 inn my inspiron 3647 desktop. which I don't...
View Articleinstall email program
i have windows 7 and i had windows 7 on my last desktop. I never had to install an email program to send email. so why do I have to do it on this windows 7 inn my inspiron 3647 desktop. which I don't...
View Article